Epson Stylus Color 3000

1. Follow the transportation instructions given on the inside of the printer cartridge port to flush your printer of the current ink set.
2. Once the procedure is complete, insert your DayGlo Inkjet Cartridges and turn on your printer to initiate the charge cycle.
3. Run a nozzle check to ensure that all of the nozzles are firing.
4. If there are any lines missing in the nozzle pattern, run an additional cleaning cycle.

Epson Stylus Pro 5000

1. Replace your current cartridge set with your DayGlo Inkjet Cartridges.
2. Run 20 full pages of each of the following at 720 dpi on inexpensive paper:
   • 100% magenta
   • 100% cyan
   • 100% yellow
   • 100% black
   • 30% magenta
   • 30% cyan
3. Run a nozzle check to ensure that all of the nozzles are firing.
4. If there are any lines missing in the nozzle pattern, run an additional cleaning cycle.

Epson Stylus Pro 7000

1. Follow the transportation instructions given in your owner's manual to flush your printer of the current ink set.
2. Once the procedure is complete, insert your DayGlo Inkjet Cartridges and turn on your printer to initiate the charge cycle.
3. Run a nozzle check to ensure that all of the nozzles are firing.
4. If there are any lines missing in the nozzle pattern, run an additional cleaning cycle.

Epson Stylus Pro 9000

1. Replace your current cartridge set with your DayGlo Inkjet Cartridges.
2. Run 15 sq. ft. of the following at 720 dpi on inexpensive paper:
   • 100% magenta
   • 100% cyan
   • 100% yellow
   • 100% black
   • 30% magenta
   • 30% cyan
3. Run a nozzle check to ensure that all of the nozzles are firing.
4. If there are any lines missing in the nozzle pattern, run an additional cleaning cycle.

Return to Wide-Format Installation and Maintenance

ENCAD Wide-Format Printers

In order to flush your ink lines, follow these instructions...

1. Remove the cartridge for the line in which you will be purging.
2. Disconnect the ink delivery line from the ink reservoir.
3. Carefully wipe any excess ink from the connector using a paper towel before proceeding.
4. Insert the tube that was in the cartridge into a container of distilled water.
5. Connect the NovaPrime( to the connector at the ink reservoir and turn it on until clear water is coming from the tube.
6. Remove the tube from the distilled water and run the NovaPrime( until the line is dry.
7. Repeat for each color necessary.
8. Fill the ink reservoirs with your DayGlo( ink set and prime the ink lines (for instructions on priming the ink lines, please refer to your owner's manual).

If you need to flush ink from you current cartridges follow these instructions...

1. Remove the needle assembly and extract the ink with the syringe included with your printer.
2. Refill the cartridge with 20 mils of the DayGlo( ink.
3. Connect the needle assembly.
4. Prime the cartridge (for instructions on priming the cartridge, please refer to your owner's manual).

Additional Instructions...

1. Print approximately 10 sq. ft. of each color on inexpensive paper at 100% to ensure that your printer is fully charged with your DayGlo ink.